STOBITEX

PU Protection Sleeves for Round Slings
H y p e r f l e x® VARIO

  • Best flexibility
  • High abrasion resistance
  • Extreme cut firmness
  • Very good elasticity
  • Good chemical resistance
  • High structural strength

 

  • Description
  • Drawing
  • Dimensions
  • Material

 

The Hyperflex VARIO Protection Sleeves are an advancement on the Hyperflex Protection Sleeves. 

They have been specially designed for round slings. 

Hyperflex VARIO Protection Sleeves are characterised by a variable inner height, which means 

they can be used in many ways.

They do not have side beading, which leads to even better flexibility.

The uncoated, side PES webbing is sealed with a thin PU impregnation resulting in good abrasion protection.

The double-sided design is shown in the diagram. The sleeves can also be supplied as single-sided versions.

 

Name

 

Attachment width B Flat width of the PES sleeve inliner approx. Max. inner height 2*A

PU layer thickness

STOBITEX - PU Protection Sleeve
HYPERFLEX VARIO
       
70/15/1 t 70 mm 85 mm 15 mm 5 mm
80/18/2 t 80 mm 98 mm 22 mm 5 mm
100/25/3 t 100 mm 125 mm 25 mm 5 mm
120/25/4 t 120 mm 148 mm 28 mm 5 mm
150/25/6 t 150 mm 175 mm 25 mm 5 mm
180/25/8 t 180 mm 205 mm 25 mm 5 mm
205/30/10 t 205 mm 235 mm 30 mm 8 mm
230/40/15 t 230 mm 270 mm 40 mm 8 mm
260/45/20 t 260 mm 305 mm 45 mm 8 mm
320/50/30 t 320 mm 370 mm 50 mm 8 mm

The details of the round sling tonnage in the description is therefore only a rough guide. The size of protection sleeve must therefore be individually chosen.

Supply in lengths of 2 and 4 m. Special sizes and designs on request.

All sizes are approximate! Techn. changes reserved.

  • Material: PU elastomer approx. 80 Shore A, elongation at break 450 % (DIN 53 504). Additional tear resistance 20 N/mm (DIN 53 515), abrasion 60 mg (DIN 53 516)
  • Structure: PU protecting cover with textile insert. 
  • Note: While abrasion protection is already ensured with small layer thicknesses, the cut firmness rises with the increasing thickness of the PU layer. A good cut firmness is ensured starting from a 5 mm layer thickness.