STOBITEX

PU Protection Sleeves
for Chains, Ropes and Wires

  • High structural strength
  • High abrasion resistance
  • Extreme cut firmness
  • Very good elasticity
  • Good chemical resistance
  • No ageing  

 

 

  • Description
  • Drawing
  • Dimensions
  • Material

 

Round ropes and chains can be provided with these PU Protection Sleeves. Both attachments and the lifting or lashing belt are thereby optimally protected. The inner diameter of these sleeves should always be selected several mm larger than the diameter of the attachment so that the rope or chain can glide easily.

These STOBITEX PU Protection Sleeves are angled on the outside, i.e. designed with smooth surfaces. This allows optimum distribution of force that also allows loads to be turned using chains or ropes.

 

Name

Inner size
di

Outer size
a * b

For chain

Weight
per m

STOBITEX – PU Protection Sleeve        
22 / 12 / 5 12 mm 22 * 22   0,50 Kg
24 / 14 / 5 14 mm 24 * 24   0,65 Kg
25 / 15 / 5 15 mm 25 * 25   0,75 Kg
28 / 18 / 5 18 mm 28 * 28   0,80 Kg
32 / 22 / 5 22 mm 32 * 32   1,00 Kg
34 / 24 / 5 24 mm 34 * 34   1,10 Kg
36 / 26 / 5 26 mm 36 * 36 6s 1,20 Kg
38 / 28 / 5 28 mm 38 * 38   1,25 Kg
42 / 32 / 5 32 mm 42 * 42 8s 1,50 Kg
45 / 35 / 5 35 mm 45 * 45   1,65 Kg
52 / 42 / 5 42 mm 52 * 52 10s 2,05 Kg
55 / 45 / 5 45 mm 55 * 55   2,35 Kg
60 / 50 / 5 50 mm 60 * 60 13s 2,65 Kg
73 / 63 / 5 63 mm 73 * 73 16s 3,40 Kg
85 / 75 / 5 75 mm 85 * 85 20s 4,30 Kg
105 / 85 / 10 85 mm 105 * 105 22s 7,70 Kg
140 / 120 / 10 120 mm 140 * 140   11,00 Kg

Supply in lengths of 2 and 4 m.
Also available with separation and guide grooves.
Special sizes and designs on request.

All sizes are approximate! Techn. changes reserved.

  • Material: PU elastomer approx. 80 Shore A, elongation at break 450 % (DIN 53 504). Additional tear resistance 20 N/mm (DIN 53 515), abrasion 60 mg (DIN 53 516)
  • Structure: PU protecting cover without textile insert. 
  • Note: While abrasion protection is already ensured with small layer thicknesses, the cut firmness rises with the increasing thickness of the PU layer. A good cut firmness is ensured starting from a 5 mm layer thickness.